+3 votes
130 views
in Bug Report by (160 points)
When placing programmable splitters in a line and connect them to the storage container (via conveyor lift), they sometimes do not connect. I put 30 storage containers in a row with 30 programmable splitters below them and connected them with conveyor lifts. Only 7 of the 30 connected. All containers and splitters are 100% aligned with each other.

When removing the programmable splitter and placing a normal splitter in the exact same position with the same rotation, it works perfectly. Placing the programmable splitter back, the problem comes back as well.

https://cdn.discordapp.com/attachments/553550313533997057/608680318588944385/unknown.png

In this screenshot it looks like the lifts are not aligned, but you can see the back side of the lift are. The right side is working, the left side is not. The right side also made the clicking sound when placing it to indicate that it is connected, the left side did not. I tried both connecting it to the container first then the splitter and splitter first then container. Both times it had the same issue, the gap shown in the screenshot just goes to the splitter end.

Since the problem is resolved when placing a normal splitter in the same spot as the programmable splitter, makes me think that this is a bug with the programmable splitter.

I hope I have explained this well enough.
by (160 points)
After some fiddling around I found the problem exists only with programmable splitters, all the other splitters (including smart splitters) work fine in the same position.
Welcome to Satisfactory Q&A, where you can ask questions and receive answers from other members of the community.
In order to keep this site accessible for everybody, please write your post in english :)
August 28th update: We've removed downvotes! One major reason is because we don't want to discourage folks from posting legitimate suggestions / reports / questions with fear of being mass downvoted (which has been happening a LOT). So we now allow you to upvote what you like, or ignore what you don't. Points have also been adjusted to account for this change.
Please use the search function before posting a new question and upvote existing ones to bring more attention to them, It will help us a lot. <3
Remember to mark resolved questions as answered by clicking on the check mark located under the upvotes of each answer.
...